View MSR9T_4826451.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Safety Relays
Monitoring Safety Relays
Minotaur MSR9T Specifications
Standards EN 954-1, ISO13849-1, IEC/EN 60204-1, IEC 60947-5-1, ANSI B11.19, AS4024.1 Cat. 3 per EN 954-1 (ISO 13849-1) C-Tick, CE marked for all applicable directives and cULus 24V AC/DC or 110/230V AC 50/ 60Hz <4VA 1 N.C. & 1 N.O. 0.5 seconds 500 Automatic/Manual 2 N.O. Safety; 1 N.C. Auxiliary B300 AC-15 4A/250V AC, 4A/120V AC P300 DC-13; 3A/24V DC 4A 500mA time lag 5A quick acting 10mA/10V 50ms Red = Power On Green = Output On 2500V C in accordance with VDE 0110 3 -10C to +55C (+14F to +131F) 90% RH IP40, (NEMA 1), DIN 0470 IP20, DIN 0470 1 x 2.5mm2 (14AWG) stranded, 1 x 4mm2 (12AWG) solid 1Nm (8.85lbin) Red Polycarbonate 35mm DIN rail 210g (0.46lbs) 100,000 operations 500,000 operations 1,000,000 operations 2,000,000 operations 2,000,000 operations 0.75mm (0.30in) peak, 10-55Hz 30g, 11ms half sine
Category Approvals Power Supply Power Consumption Safety Inputs Input Simultaneity Maximum Input Resistance Reset
Description
The MSR9T has 1 N.C. and 1 N.O. dual channel input for use with gate interlocks and emergency stop buttons in higher risk applications. The MSR9T is typically used for gate interlocks incorporating the diversity of one positive opening and one non positive opening interlock. The MSR9T has output monitoring that can accommodate an automatic/manual reset. Automatic/manual reset can use a jumper or can be used to check operation of the contacts. The MSR9T has 2 N.O. safety outputs and 1 N.C. auxiliary output. The safety outputs have independent and redundant internal contacts to help ensure the safety function. The auxiliary contact is an nonsafety output intended to provide an external signal about the status of the safety outputs.
Outputs Output Utilization per IEC 60947-5-1 (Inductive)
Thermal Current (non switching) Fuses Input (internal, replace.) Output (external) Min. Switched Current/Voltage Maximum Dropout Time Indication LEDs Impulse Withstand Voltage Installation Group Pollution Degree Operating Temperature Humidity Enclosure Protection Terminal Protection Conductor Size Torque Settings--term. screws Case Material Mounting Weight Electrical Life 220V AC/4A/880VA cos=0.35 220V AC/1.7A/375VA cos=0.6 30V DC/2A/60W 10V DC/0.01A/0.1W Mechanical Life Vibration Shock
Features
* * * * * * * Category 3 per EN 954-1 Stop category 0 1 N.C. and 1 N.O. dual channel input 2 N.O. safety outputs 1 N.C. auxiliary output Automatic reset 45mm wide housing
See Output Ratings on page 1-29 for details. Consult factory for ratings not shown.
Applications
Contactor monitoring circuit Contactor switching circuit MSR9T Supply inclusive of switching circuit Contactor Monitored by Minotaur
4-16
Safety Relays
Monitoring Safety Relays
Minotaur MSR9T Product Selection
Inputs 1 N.C. & 1 N.O. Safety Outputs 2 N.O. Auxiliary Outputs 1 N.C. Power Supply 24V AC/DC 110/230V AC Catalogue Number 440R-F23027 440R-F23028
Accessories
Description 500mA Fuse Page Number 14-6 Catalogue Number 440R-A31562
Dimensions--mm (inches) Block Diagram
120 (4.72) 45.5 (1.79)
A1 A2 X1 X2 S13 S14 S22 S21 13 23 31 F1 110/230 K2 K3 VR1 K2 Logic C1 T1 Logic K2 T2 K2 K3 K3 K1 K1 K1 K1 K2
73 (2.87)
K1 ~ 24VDC
35mm DIN Rail Mounting
14 24
32
Typical Wiring Diagrams
L1 Reset L1
L1 L2 L3
closed
L1 L2 L3
closed
S21 S22
A1
13
23
31
X1 K1
S21 S22
A1
13
23
31
X1 K1
MSR9T
MSR9T
K2
open
K2
open
S13
S14
A2
14 K1
24 K2
32
X2
Aux
S13
S14
A2
14 K1
24 K2
32
X2
Aux
M
N
M
N
Dual-Channel Safety Gate, Manual Reset, Dual-Channel Output, Monitored Output Application Details
Dual-Channel Safety Gate, Automatic Reset, Dual-Channel Output, No Monitored Output
Replaceable Fuse Voltage Selector Switch (440R-F23028) 230V AC 110V AC
4-17

▲Up To Search▲

Price & Availability of MSR9T

	To Download MSR9T Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .